A practical reference on retention time: what it is, how it behaves, what the literature reports, and where the honest uncertainties sit.
This page was last updated on 2025-12-21 and is reviewed periodically as new material appears.
Reversed-phase chromatography dominates modern HPLC testing, using a nonpolar stationary phase such as chemically bonded octadecyl groups and a polar mobile phase of water mixed with organic solvent. Analytes partition between the mobile and stationary phases according to hydrophobicity. Gradient elution changes the mobile phase composition over time to separate compounds with a wide range of retention. Isocratic elution keeps the composition constant and is simpler for routine assays. Column temperature, pH, and flow rate influence selectivity, peak shape, and retention time, so these parameters are controlled during a validated method.
Detection in HPLC testing commonly relies on ultraviolet-visible absorbance, fluorescence, refractive index, or mass spectrometry. A diode array detector records full spectra across a wavelength range, which helps identify co-eluting peaks. Mass spectrometry provides mass-to-charge ratios and can confirm molecular identity at low concentrations. The choice of detector depends on analyte structure, required sensitivity, and whether quantitation or identification is the goal. No single detector works for every compound, and method development often compares responses before selecting one.
Quality control samples are inserted at intervals to monitor accuracy and precision throughout a batch. Blank samples detect contamination, while spiked samples assess recovery from the sample matrix. Calibration standards establish the relationship between detector response and concentration, and control samples are prepared independently from them whenever possible. Laboratories also participate in proficiency testing and maintain audit trails, instrument logs, and reagent records. Ongoing review of control charts can reveal trends before they cause out-of-specification results.
Method validation demonstrates that an HPLC procedure is suitable for its intended purpose. Common validation parameters include accuracy, precision, specificity, linearity, range, limit of detection, limit of quantification, and robustness. Accuracy reflects agreement with a reference value, while precision describes repeatability under defined conditions. Specificity shows whether the method can measure the analyte in the presence of impurities or matrix components. Validation documents are reviewed before a method is used for routine testing or regulatory submissions.
| Property | Value | Notes |
|---|---|---|
| Separation mode | Reversed-phase | Most common for neutral and moderately polar analytes |
| Column particle size | 3–5 µm | Smaller particles improve resolution but raise backpressure |
| Mobile phase pH range | 2–8 | Silica-based columns may degrade outside this range |
| Typical flow rate | 1.0–2.0 mL/min | For analytical columns with 4.6 mm internal diameter |
| Common synonyms | HPLC, LC, high-pressure liquid chromatography | High-performance liquid chromatography is the standard expansion |
Method validation examines whether an HPLC procedure is suitable for its intended purpose. Common parameters include accuracy, precision, specificity, linearity, range, detection limit, quantification limit, and robustness. Accuracy describes closeness to a true or accepted value, while precision describes agreement among repeated measurements. Specificity shows whether the method can measure the analyte without interference from related substances. Robustness tests small deliberate changes in flow, temperature, or solvent composition. Validation is not a one-time event; methods may need partial revalidation after changes to instruments, columns, sample handling, or specification limits. Regulatory guidance provides frameworks, but some details remain method-specific.
Regulatory and pharmacopeial texts shape how HPLC testing is performed and documented. The International Council for Harmonisation provides validation guidance, while pharmacopeias publish general chromatography chapters and monographs for specific materials. Accreditation standards such as ISO/IEC 17025 address laboratory competence and traceability. Inspectors may review instrument qualification, analyst training, reference material control, and electronic records. Open questions include how best to validate methods for new complex products and how to handle automated data processing. Laboratories generally resolve these issues through risk assessment, method lifecycle management, and documented scientific justification.
Key performance measures include retention time, peak area, peak height, resolution, tailing factor, and plate count. Retention time helps identify a peak under fixed conditions, but confirmation often requires a second method or detector. Peak area and height relate to concentration through calibration curves, which may be linear or nonlinear depending on the detector response. Resolution describes separation between adjacent peaks, while tailing factor and plate count describe peak shape and column efficiency. Performance checks verify these values before and during a run to confirm that the instrument is performing within limits.
High-performance liquid chromatography testing separates components of a liquid sample by forcing a mobile phase through a packed column. The stationary phase inside the column interacts with analytes to different degrees, so each compound exits at a characteristic retention time. A pump delivers solvent at controlled flow and pressure, while an injector introduces a precise sample volume. Detectors such as ultraviolet-visible, fluorescence, refractive index, or mass spectrometric instruments record the separated bands. The resulting chromatogram provides qualitative and quantitative information about the mixture.
Laboratories apply HPLC testing across pharmaceutical, food, environmental, and industrial chemistry. The method can measure active ingredients, impurities, additives, preservatives, and degradation products. Sample preparation often includes dilution, filtration, and sometimes extraction or derivatization. The choice of column, mobile phase, pH, temperature, and detector depends on the analytes and matrix. Results are compared with reference standards to assign identity and concentration. Method suitability is judged by resolution, precision, and accuracy.
HPLC testing is not a single fixed procedure; it is a family of separation modes. Reversed-phase, normal-phase, ion-exchange, size-exclusion, and affinity chromatography each suit different analyte properties. Reversed-phase methods dominate because they handle many neutral and moderately polar compounds. Detection can be optical, electrochemical, or mass spectrometric, and the detector dictates what information is available. Coupling with mass spectrometry increases selectivity and enables identification when standards are unavailable. The technique cannot separate every mixture without adjustment.
The Swiss company GlycArt Biotechnology developed a system using CHO cells, where the cells were engineered to overexpress an enzyme called GnTIII. The effect of this overexpression is to block the formation of fucosylated oligosaccharides on the expressed antibodies. This technology was first reported in 1999 and was the basis of GlycArt Biotechnology. Roche acquired GlycArt in 2005 in order to acquire technology to afucosylate antibodies. GlycArt Biotechnology had been founded in 2000 as a spin-out company of the Swiss Federal Institute of Technology in Zurich. The first commercial product from the GlycArt acquisition was obinutuzumab, which as Gazyva gained FDA approval in November 2013 for the treatment of chronic lymphocytic leukemia. Kyowa Hakko Kirin's "Potelligent" platform uses a CHO cell line in which FUT8 has been knocked out, and which produces antibodies with little to no fucose in the Fc region. The company gained marketing approval in Japan in April 2012 for a monoclonal antibody drug called mogamulizumab which was developed using the platform. The Company's technology was first reported in 2004.
Feoktist I. Bogoyavlenskiy (1933–1935) Vasiliy V. Evlampiev (1935–1939) Faizi F. Faizyllin (1958–1960) Boris A. Arbuzov (1941–1950) Arkadiy N. Pudovik (1950–1958) Faizi F. Faizyllin (1958–1960) Vera F. Toropova (1960–1965) Alexander I. Kostromin (1965–1968) Alexander I. Konovalov (1968–1972) Irina V. Konovalova (1972–1987) Galina A. Chmutova (1987–1992) Nikolai A. Ulakhovich (1992–2000) Vladimir I. Galkin (since 2000– until present) Department of Analytical Chemistry Department of High Molecular and Organoelement Compounds Department of Inorganic Chemistry Department of Organic Chemistry Department of Physical Chemistry Department of Chemical Education Department of Environmental Chemistry Department of Applied Chemistry Department of Stereochemistry Division for Analytical Chemistry Division for Inorganic Chemistry and Coordination chemistry Division for Organic Chemistry Division for Physical Chemistry Division for Organoelement Compounds Division for Stereochemistry Division for Applied Chemistry Division for Environmental Chemistry
According to Annex 13 of the Convention on International Civil Aviation, an aviation accident is an occurrence associated with the operation of an aircraft, which takes place from the time any person boards the aircraft with the intention of flight until all such persons have disembarked, and in which (a) a person is fatally or seriously injured, (b) the aircraft sustains significant damage or structural failure, or (c) the aircraft goes missing or becomes completely inaccessible. Annex 13 defines an aviation incident as an occurrence, other than an accident, associated with the operation of an aircraft that affects or could affect the safety of operation. A hull loss occurs if an aircraft is damaged beyond repair, is lost, or becomes completely inaccessible.
Patients with Type II diabetes will have elevated glucagon levels during a fast and after eating. These elevated glucagon levels over stimulate the liver to undergo gluconeogenesis, leading to elevated blood glucose levels. Consistently high blood glucose levels can lead to organ damage, neuropathy, blindness, cardiovascular issues and bone and joint problems. It is not entirely clear why glucagon levels are so high in patients with Type II diabetes. One theory is that the alpha cells have become resistant to the inhibitory effects of glucose and insulin and do not respond properly to them. Another theory is that nutrient stimulation of the gastrointestinal tract, thus the secretion of gastric inhibitory polypeptide and Glucagon-like peptide-1, is a very important factor in the elevated secretion of glucagon.
Cells require a full and functional cellular machinery to live. When they belong to complex multicellular organisms, they need to communicate among themselves and work for symbiosis in order to give life to the organism. These communications between cells triggers intracellular signaling cascades, termed signal transduction pathways, that regulate specific cellular functions. Each signal transduction occurs with a primary extracellular messenger that binds to a transmembrane or nuclear receptor, initiating intracellular signals. The complex formed produces or releases second messengers that integrate and adapt the signal, amplifying it, by activating molecular targets, which in turn trigger effectors that will lead to the desired cellular response.
Sources: en.wikipedia.org
The overall fold of the KaiA monomer is that of a four-helix bundle, which forms a dimer in the known structure. KaiA functions as a homodimer. Each monomer is composed of three functional domains: the N-terminal amplitude-amplifier domain, the central period-adjuster domain and the C-terminal clock-oscillator domain. The N-terminal domain of KaiA, from cyanobacteria, acts as a pseudo-receiver domain, but lacks the conserved aspartyl residue required for phosphotransfer in response regulators. The C-terminal domain is responsible for dimer formation, binding to KaiC, enhancing KaiC phosphorylation and generating the circadian oscillations. The KaiA protein from Anabaena sp. (strain PCC 7120) lacks the N-terminal CheY-like domain. KaiB adopts an alpha-beta meander motif and is found to be a dimer or a tetramer. KaiC belongs to a larger family of proteins; it performs autophosphorylation and acts as its own transcriptional repressor. It binds ATP.
Scientific techniques, such as immunostaining, depend on chemical specificity. Immunostaining utilizes the chemical specificity of antibodies in order to detect a protein of interest at the cellular level. Another technique that relies on chemical specificity is Western blotting, which is utilized to detect a certain protein of interest in a tissue. This technique involves gel electrophoresis followed by transferring of the sample onto a membrane which is stained by antibodies. Antibodies are specific to the target protein of interest, and will contain a fluorescent tag signaling the presence of the researcher's protein of interest. Enzyme promiscuity Substrate (chemistry)
On 1 December 1978, the Health and Safety Executive announced their intention to prosecute the university for breach of safety legislation. The case was heard in October 1979 at Birmingham Magistrates' Court. Although the source of infection was traced, the mode and cause of transmission was not. Evidence presented by several internationally recognised experts, including Kevin McCarthy, Allan Watt Downie and Keith R. Dumbell, showed that airborne transmission from the laboratory to the telephone room where Parker was supposedly infected was highly improbable. The experts calculated that it would require 53,700 litres (11,812 imp gal) of virus fluid to have been aspirated (meaning, in this context, removed by suction of fluid and cells through a needle) and it would take 20,000 years for one particle to travel to the telephone room at the rate the fluid was aspirated. It was additionally found that although the Shooter Inquiry noted the poor state of the duct sealing in the laboratory, this was caused after the outbreak by engineers fumigating the laboratory and ducts. The university was found not guilty of causing Parker's death.
Some have argued that there is little evidence to indicate any benefit to using bodybuilding protein or amino acid supplements. A 2005 overview concluded that "[i]n view of the lack of compelling evidence to the contrary, no additional dietary protein is suggested for healthy adults undertaking resistance or endurance exercise". In contrast, a 2018 systematic review, meta-analysis and meta-regression concluded that, “Dietary protein supplementation significantly enhanced changes in muscle strength and size during prolonged RET in healthy adults.“ (RET is an abbreviation for resistance exercise training.) Instant breakfast Protein bar "Dietary Supplement Health and Education Act of 1994". U.S. Food and Drug Administration. 4 February 2020. Archived from the original on June 2, 2009.
Sources: en.wikipedia.org
Bactericidal permeability-increasing protein (BPI) is a 456-residue (~50kDa) protein that is part of the innate immune system, coded for in the human by the BPI gene. It belongs to the family of lipid-binding serum glycoproteins. BPI was initially identified in neutrophils, but is found in other tissues including the epithelial lining of mucous membranes. It is an endogenous antibiotic protein with potent killing activity against Gram-negative bacteria. It binds to compounds called lipopolysaccharides produced by Gram-negative bacteria. Lipolysaccharides are potent activators of the immune system; however, BPI at certain concentrations can prevent this activation. BPI was discovered by Jerrold Weiss and Peter Elsbach at New York University Medical School.
Absorption spectroscopy is spectroscopy that involves techniques that measure the absorption of electromagnetic radiation, as a function of frequency or wavelength, due to its interaction with a sample. The sample absorbs energy, i.e., photons, from the radiating field. The intensity of the absorption varies as a function of frequency, and this variation is the absorption spectrum. Absorption spectroscopy is performed across the electromagnetic spectrum. Absorption spectroscopy is employed as an analytical chemistry tool to determine the presence of a particular substance in a sample and, in many cases, to quantify the amount of the substance present. Infrared and ultraviolet–visible spectroscopy are particularly common in analytical applications. Absorption spectroscopy is also employed in studies of molecular and atomic physics, astronomical spectroscopy and remote sensing. There is a wide range of experimental approaches for measuring absorption spectra. The most common arrangement is to direct a generated beam of radiation at a sample and detect the intensity of the radiation that passes through it. The transmitted energy can be used to calculate the absorption. The source, sample arrangement and detection technique vary significantly depending on the frequency range and the purpose of the experiment. Following are the major types of absorption spectroscopy:
Quantitative studies of enzymatic reactions often found that the acceleration of chemical reaction speed cannot be fully explained by existing theories like the approximation, acid/base catalysis and electrophile/nucleophile catalysis. And there is an obvious paradox: in reversible enzymatic reaction if the active site perfectly fits the substrates then the backward reaction will be slowed since products cannot fit perfectly into the active site. So conformational distortion was introduced and argues that both active site and substrate can undergo conformational changes to fit with each other all the time.
GPCRs become desensitized when exposed to their ligand for a long period of time. There are two recognized forms of desensitization: 1) homologous desensitization, in which the activated GPCR is downregulated; and 2) heterologous desensitization, wherein the activated GPCR causes downregulation of a different GPCR. The key reaction of this downregulation is the phosphorylation of the intracellular (or cytoplasmic) receptor domain by protein kinases. Cyclic AMP-dependent protein kinases (protein kinase A) are activated by the signal chain coming from the G protein (that was activated by the receptor) via adenylate cyclase and cyclic AMP (cAMP). In a feedback mechanism, these activated kinases phosphorylate the receptor. The longer the receptor remains active the more kinases are activated and the more receptors are phosphorylated. In β2-adrenoceptors, this phosphorylation results in the switching of the coupling from the Gs class of G-protein to the Gi class. cAMP-dependent PKA mediated phosphorylation can cause heterologous desensitisation in receptors other than those activated.
Eculizumab (Soliris) appears to be useful for atypical hemolytic uremic syndrome (aHUS). In September 2011 the U.S. Food and Drug Administration (FDA) approved it as an orphan drug to treat people with aHUS. This approval was based on two small prospective trials of 17 people and 20 people. In the UK, NICE issued guidance on the use of Eculizumab for treating aHUS, based on five evidence sources, including those used by the FDA No randomised controlled trials were identified. All prospective studies were phase 2, open‑label, non‑randomised, single‑arm studies that included patients with different clinical baseline characteristics. The prospective studies lasted 26 weeks; however, patients were allowed to continue treatment with eculizumab in a long‑term extension study. Ravulizumab-cwvz (Ultomiris) is a second generation monoclonal antibody for aHUS made by Alexion pharmaceuticals, Inc. The target of ravulizumab-cwvz is the same eculizumab (Soliris) with changes to the structure of the antibody resulting in a longer serum half life and therefore reduced dosing regimen.
Sources: en.wikipedia.org
HPLC testing separates and quantifies components in a liquid sample. It is used to check identity, purity, concentration, or stability. The technique works best for compounds that dissolve and are not easily vaporized.
The pump maintains a steady flow rate and pressure, which keeps retention times reproducible. Pulsation or flow errors can shift peaks and distort quantitation. Modern pumps use feedback control to reduce these variations.
HPLC alone usually separates compounds but does not always identify them. Retention time matching with a known standard provides tentative identification. Coupling HPLC to mass spectrometry adds mass information that supports structural identification.
Method validation is the documented process of showing that an HPLC procedure produces reliable results for a defined purpose. It examines parameters such as accuracy, precision, specificity, linearity, and robustness. Regulators and quality systems often require validation before routine use.